Units for Soil Layer Depth, Soil Cohesion (undrained shear strength) and Soil Density.

The soil profile is input via a table, with each row representing a different layer of soil.

• Soil Type - Select the type that best describes the contents of the selected layer.
• Depth - Depth for each soil layer is measured from Ground Elevation (GE, by default 0ft) to top of the ground surface to the bottom of each layer.

• Friction Angle - This is an input for Effective Friction Angle (Soil-Pile Friction Angle) for cohesionless soil layer (such as sand, gravel, or rock). The unit of Friction Angle is in degrees.

  Note: It is assumed that the soil’s Angle of Internal Friction equal to the Effective Friction Angle.
• Cohesion - The undrained shear strength of the soil. For cohesion soils, such as clays and silts.
• Average Density - This is an input for average soil density for the respective soil layer.

Steps the Wizard to the previous step.

Proceeds the Wizard to the next step.

Exits the Wizard without creating a new Dead Man Anchor Foundation Job.